ACS102-5TA |
RFQ for ACS102-5TA Required Field |
 |
| Technical/Catalog Information | ACS102-5TA |
| Vendor | STMicroelectronics |
| Category | Discrete Semiconductor Products |
| Triac Type | Logic - Sensitive Gate |
| Configuration | Single |
| Voltage - Off State | 500V |
| Current - On State (It (RMS) (Max) | 200mA |
| Voltage - Gate Trigger (Vgt) (Max) | 900mV |
| Current - Gate Trigger (Igt) (Max) | 5mA |
| Current - Hold (Ih) (Max) | 20mA |
| Current - Non Rep. Surge 50, 60Hz (Itsm) | 7.3A, 8A |
| Mounting Type | Through Hole |
| Package / Case | TO-92 |
| Packaging | Bulk |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | ACS102 5TA ACS1025TA |
| Product | Manufacturers | Pack | D/C |
| ACS102-5TA | - | - | 08+ |
The ACS102 belongs to the AC line switch family built around the ASD concept. This high performance 5 mA switch circuit is able to control an up to 0.3 A load.
The ACS switch embeds a high voltage clamping structure to absorb the inductive turn off energy and a gate level shifter driver to separate the digital controller from the main switch. It is triggered with a negative gate current flowing out of the gate pin.
Typical Application |
Features |
| · AC on-off static switching in appliance control systems· Drive of low power high inductive or resistive loads like- relay, valve, solenoid, dispenser- pump, fan, micro-motor- low power lamp bulb, door lock | · Blocking voltage : VDRM / VRRM = 500V· Clamping voltage : VCL = 600 V· Nominal current : IT(RMS) = 0.2 A· Gate triggering current : IGT < 5 mA· Switch integrated driver· SO-8 package:- drive referenceCOMconnected to 2 cooling pins- 3mmcreepage distance from pin OUT to other pins |
|
Symbol |
Parameter |
Value |
Unit | ||
|
VDRM /VRRM |
Repetitive peak off-state voltage | Tj = 25 °C |
500 |
V | |
|
IT(RMS) |
RMS on-state current full cycle sine wave 50 to 60 Hz | TO92 | Tamb = 75 °C |
0.2 |
A |
| SO-8 | Tamb = 75 °C |
0.2 |
A | ||
|
ITSM |
Non repetitive surge peak on-state current Tj initial = 25°C, full cycle sine wave |
F =50 Hz |
7.3 |
A | |
| F =60 Hz |
8 |
A | |||
|
dI/dt |
Critical rate of rise of on-state current IG = 10mA, tr = 100ns |
F =120 Hz |
20 |
A/s | |
|
VPP |
Non repetitive line peak pulse voltage | note 1 |
2 |
KV | |
|
Tstg |
Storage temperature range |
-40 to +15
SupplierPost a Buying LeadPDF / DatasheetRelated PDFRelated Models | |||
